QUESTION: HOW TO CONNECT BACKUP FIBER?

ANSWER: If the need ever arises to use the "old" fiber it will need connected as follows:

    1. Elementary Computer Lab has the old fiber tray at the top of the rack. Open it and connect an
ST to SC fiver patch cable to ports #7 and #8.

   2. Connect the other end of the patch cable to a fiber pair that runs back to the MDF (in the elm media center)

   3. At the Elementary MDF use a fiber patch cable to connect the same pair that was connected in the IDF (elem computer lab)
to a fiber g-bic in the fiber module.